Values reference¶

Everything lives in CAT_Gen > Values. Most of these are status outputs and commands: the set writes them to report what it is doing, and writing to them yourself tells it what to do.

Values¶

Value	Type	Reading it tells you	Writing it does
`Running`	Bool	Engine is at rated speed	`true` = start now (MANUAL)
`Starting`	Bool	Cranking or coming up to speed	—
`Stoped`	Bool	Engine is at rest	`true` = stop, and reset a fault
`Auto`	Bool	AUTO is selected	`true` = select AUTO
`E Stop`	Bool	Emergency stop is latched in	`true` = trip it
`Remote Start`	Bool	—	`true` = run (AUTO only)
`Load`	Number	Load the set is carrying, kW	Sets the connected load
`Fuel`	Number	Tank level, percent	Sets the level
`Fault`	String	Active shutdown, empty when healthy	—

Created on first run

Remote Start, Load, Fuel and Fault are created the first time the set runs, so you will not see them until you press Play once.

The three you will actually use¶

Auto to arm it
Remote Start to run it
Running to know it is up

Worked example: a light that only works when the set is up¶

Read Running:

local values = workspace.CAT_Gen.Values
local light = workspace.Lobby.Light.PointLight

local function update()
    light.Enabled = values.Running.Value
end

values.Running.Changed:Connect(update)
update()

For a whole building, read the ATS's Load Active instead, which also covers utility power.

Running is false while cranking and during cooldown

If you want "the set is doing something", check Starting as well, or read the State attribute.